- Category: Product News
The paint manufacturer Teknos has introduced the repair coating Teknoblade Repair 9000. Teknoblade Repair 9000 is an elastomer-based high solid coating with 100% proportion of solids. It can be sprayed and manually applied and forms a protective elastic layer with a thickness of up to 5 millimetres.
- Category: Product News
With its Hybrid Tower 2.0, Max Bögl Wind is introducing a new generation of its tower concept.
- Category: Product News
The new SG 8.0-167 DD offshore wind turbine variant for Asia-Pacific markets addresses local conditions across the region. Based on the Siemens Gamesa Offshore Direct Drive wind turbine platform, the variant is suited for the growing Taiwanese offshore wind market.
- Category: Product News
LM Wind Power's first two sets of LM 66.6 blades have been installed on Shanghai Electric Wind Power's 4.0MW-136 wind turbine in China. Shanghai Electric Wind Power's 4MW platform is designated for Windclass II areas in Shanghai and beyond.
- Category: Product News
DNV GL has published the revised standard for design of floating wind turbine structures DNV GL-ST-0119, and a new guideline for the certification of floating wind turbines, DNVGL-SE-0422. The guidelines provide a technical reference suite for this emerging technology. The documents cover the complete requirements for the integrated system and can be applied for design and certification of floating wind farms, turbines or their components.
- Category: Product News
DNV GL has joined forces with Swedish atmospheric science company, WeatherTech. The combined expertise of both companies will enable the development of a new icing model for wind turbines, allowing customers to better predict the performance of turbines in cold climates.
- Mita-Teknik introduces its sixth generation SCADA surveillance system
- Mammoet introduces concept cranes for wind energy construction and maintenance
- New boat landing for offshore wind floatel MV Bluefort
- GCube launches cyber risk cover for renewables
- Ingeteam develops new offshore wind power conversion architecture
- fos4X bundles its digital portfolio under the umbrella brand X4edge
- Enerpac delivers trolley system to GeoSea
- Liebherr expands its portfolio with main bearings for wind turbines
- Bachmann introduces new condition monitoring module
- Greenbyte launches predictive maintenance software
- Nordex installs first N149 wind turbine
- Successful execution of offshore test of new installation technology for offshore wind
- Käufer introduces rotor blade access system for wind turbines up to 12MW
- Liebherr introduces frequency converter system for multi-megawatt wind turbines
- IMO presents blade bearing retrofit kit
- R&D investment sees offshore wind success for Aleron’s hybrid ROV
- Vaisala launches energy budget outlook service
- SeaPlanner launches full-service permit to work solution for offshore wind farms
- DNV GL to assist TMT with the development of new rotor blades
- Van Oord to install suction bucket foundations at Deutsche Bucht Offshore Wind Farm
- Automated drone robots inspect 80 metre wind turbine blades
- FAA releases performance assessment report on DeTect’s Harrier ADLS
- Ahlstrom-Munksjö introduces new fabric for producing wind turbine blades
- Doosan to develop 8MW offshore wind turbine
- Universal Foundation partner with Siemens Gamesa to perform test installation on industrialised suction bucket concept
- Vestas and Maersk Supply Service to develop new crane solution for on- and offshore wind
- Max Bögl Wind introduces second version of its hybrid towers
- Equinor has installed Batwind to store energy from offshore wind farm
- Leosphere receives validation of Wind Iris TC Lidar
- ZephIR Lidar achieves full IEC compliance