Published: 19 October 2020 19 October 2020
In connection with a power curve campaign, Siemens Gamesa has tested ZX Lidars’ nacelle based continuous wave scanning Lidar. Based on the results achieved, both on the medium range and long range measurements, Siemens Gamesa Renewable Energy approves the use of the nacelle based Continuous Wave scanning Lidar ‘ZX TM’ from Lidar OEM ZX Lidars for power performance testing.
In addition to this, operational ‘rotor equivalent’ power curves can also be measured with ZX TM’s 50 points around the full rotor swept area. This can be useful for turbines with larger rotor diameters offshore and on onshore sites with complex veer or shear profiles.
This used Lidar device allows the power curve of SGRE wind turbines to be measured and verified as a function of the Hub Height wind speed and may be, when agreed with the customer, used instead of the procedure described in the IEC61400-12-1:2017 (ed. 1/ed. 2) using a meteorological mast and anemometry installation.