Print
Published: 04 April 2016 04 April 2016

Ring-Shaped Bearingless Generator with Buoyant Rotor and Modular Structure

Deok Je Figure 1In wind turbines, bearing failures have been a continuing problem and have accounted for a significant proportion of all failures. Bearing-related downtime is among the highest of all components of wind turbines. The location of wind turbines is moving offshore. However, to access offshore sites is difficult and thus wind turbines with high reliability and availability are required. Direct-drive wind generators are argued to have higher reliability and availability than geared generators. However, direct-drive generators require a large diameter, which results in a large mass and high cost, in order to get a high torque rating compared to geared generators. It is disadvantageous in terms of manufacture and maintenance to construct direct-drive generators with a large diameter as a one-body structure. In scaling up the power of direct-drive generators, the structural part becomes dominant in the total mass of the generators. Therefore, it is necessary to find a solution to significantly reduce bearing failures and structural mass, and to facilitate manufacture and maintenance for large direct-drive wind generators.

By Dr Deok-je Bang, Korea Electrotechnology Research Institute, South Korea

Want to read full articles? Sign up free of charge and login and read the full text of published articles on our website.

Joomla SEF URLs by Artio