Correcting Yaw Errors and Measuring the Improved Power Curves

romowindIt is an all too common sight: turbines in a wind farm pointing in different directions. This means, of course, that some of the turbines will be operating with a significant yaw misalignment. This in turn causes loss of energy production and higher fatigue loads. The obvious explanation is that the flow pattern where the vane for yaw control is positioned (usually at the back of the nacelle) has been disturbed by the upstream rotor and by the proximity of the nacelle. Other reasons may be that the instruments are not aligned properly, or may simply be of quite poor quality. There are, at present, only two technologies capable of measuring the yaw misalignment correctly – a nacelle-mounted lidar and the Spinner Anemometer. In this article we demonstrate that the Spinner Anemometer has some very obvious advantages related to cost, data quality and robustness. We will be reporting on our experience of testing the instrument for measurements of yaw misalignment and power curve improvements.

By Jørgen Højstrup, Jesper Degn Nielsen and Jens Lund Lauritsen, ROMO Wind, Denmark

Login

Use of cookies

Windtech International wants to make your visit to our website as pleasant as possible. That is why we place cookies on your computer that remember your preferences. With anonymous information about your site use you also help us to improve the website. Of course we will ask for your permission first. Click Accept to use all functions of the Windtech International website.