G & G International have taken delivery of two 150-tonne assembly lines for their windmill tower foundations manufacture from Pemamek. PEMA’s newly developed assembly line with special self-aligning roller beds is a new solution for automation of wind turbine tower and foundation manufacturing.
PEMA assembly lines played a key role in their first major project where G & G delivered 30 transition pieces weighing approximately 250 tonnes to Doorbraak Wind Farm of Germany. G & G will also deliver 72 transition pieces to Northwind Offshore Wind Farm project, a new wind farm on the Bank Zonder Naam, 37 kilometres off the coast of Zeebrugge, Belgium. Idesa will construct the remaining 32. The Belgian company Northwind has placed an order worth € 48 million for the production of steel transition constructions for its offshore wind turbines. G & G International is taking the lead for this order, in the joint venture GI WindForce JV, set up with the Spanish firm Idesa, to supply these constructions at the start of 2013.
PEMA assembly lines played a key role in their first major project where G & G delivered 30 transition pieces weighing approximately 250 tonnes to Doorbraak Wind Farm of Germany. G & G will also deliver 72 transition pieces to Northwind Offshore Wind Farm project, a new wind farm on the Bank Zonder Naam, 37 kilometres off the coast of Zeebrugge, Belgium. Idesa will construct the remaining 32. The Belgian company Northwind has placed an order worth € 48 million for the production of steel transition constructions for its offshore wind turbines. G & G International is taking the lead for this order, in the joint venture GI WindForce JV, set up with the Spanish firm Idesa, to supply these constructions at the start of 2013.