Wind power plants are continuously growing in size and power. This poses new challenges to measurement technology. A typical example is the measurement of torques in a wind power plant. These measurements are used to optimise the wind power plants and so increase efficiency.

Even efficiency increases of just a few per cent can result in savings worth millions. As the rotor of a wind power plant rotates relatively slowly, a gear increases the speed to appropriate values for the downstream generator which then converts the wind energy into electrical energy. This means that the torque is extremely high, especially on the rotor side. Depending on the plant and wind conditions, torques in the range of several MN·m can occur. The measurement technology specialist HBM supplies customised torque transducers for this sector with rotating or non-rotating designs and a nominal torque of 1.5 MN·m. Design proposals for even higher torques have also been developed and can be realized if requested by customers.
Use of cookies

Windtech International wants to make your visit to our website as pleasant as possible. That is why we place cookies on your computer that remember your preferences. With anonymous information about your site use you also help us to improve the website. Of course we will ask for your permission first. Click Accept to use all functions of the Windtech International website.